Kivik Ottoman Assembly Instructions

Assembling a Kivik ottoman can be a breeze with the right instructions. This versatile piece of furniture not only provides additional seating but also serves as a storage solution. Here's a step-by-step guide to help you put together your Kivik ottoman efficiently and safely.

Before you start, ensure you have all the necessary tools and parts. Your Kivik ottoman should come with wooden legs, upholstered top, and assembly hardware. You'll also need a Phillips screwdriver, a rubber mallet, and, optionally, a helper for some steps.

Preparation and Initial Assembly

Begin by laying out all the parts and hardware in a well-lit, spacious area. This will make it easier to locate each piece as you proceed with the assembly. Ensure the upholstered top is facing up and the wooden legs are separated.

Start by attaching the wooden legs to the upholstered top. Locate the pre-drilled holes on the underside of the top and match them with the corresponding holes on the wooden legs. Insert the bolts through the holes from the bottom up, ensuring they are fully inserted into the upholstered top.

Attaching the Legs

Using your Phillips screwdriver, loosely thread the provided nuts onto the bolts. Do not tighten them completely at this stage. You may need to use a rubber mallet to gently tap the legs into place if they are not fitting snugly.

Once all four legs are loosely attached, have a helper assist you in flipping the ottoman right-side up. This will make it easier to access the underside for the next steps. Ensure the upholstered top is facing down to protect the fabric.

Securing the Legs

Now, using your screwdriver, securely tighten the nuts on the bolts. Ensure they are snug but be careful not to overtighten, as this could damage the legs or the upholstered top. Once all legs are securely attached, gently test the stability of the ottoman by applying slight pressure on the upholstered top.

If the ottoman feels sturdy and the legs are firmly attached, proceed to the next step. If not, double-check that all bolts and nuts are securely tightened.

Attaching the Ottoman Lid

The Kivik ottoman comes with a hinged lid for easy access to the storage space inside. Before attaching the lid, ensure the hinges are properly aligned with the pre-drilled holes on the upholstered top and the lid.

Start by loosely attaching one side of the lid using the provided screws and hinges. Ensure the lid can open and close freely without obstruction. Once the first side is securely attached, repeat the process for the other side.

Securing the Hinges

After both sides are loosely attached, use your screwdriver to securely tighten the screws. Ensure the lid can still open and close freely. If the lid is too tight or too loose, adjust the screws as needed. Once the hinges are securely attached, test the lid by opening and closing it several times.

If the lid is functioning properly and the hinges are securely attached, your Kivik ottoman is now fully assembled and ready for use. Place it in your desired location, and enjoy the additional seating and storage it provides.

Congratulations on successfully assembling your Kivik ottoman! With proper care and maintenance, your new furniture piece will serve you well for years to come. Happy decorating!