Burlap Wire Wreath Tutorial: Easy Steps to DIY

Transforming a simple wire wreath into a rustic, charming piece of decor is easier than you think. Burlap, with its textured, earthy appeal, is the perfect material to achieve this look. In this guide, we'll walk you through the process of putting burlap on a wire wreath, step by step.

Before we dive in, gather your materials: a wire wreath form, burlap ribbon or strips, scissors, and optionally, a hot glue gun and some embellishments like flowers, pine cones, or berries.

Preparing Your Burlap

Burlap comes in various forms - rolls, ribbons, or strips. For this project, we'll use burlap ribbon or strips. If you're using a roll, cut it into strips about 2-3 inches wide.

If your burlap is very rough or has loose threads, you might want to trim those off for a neater finish. Also, consider fraying the edges of your burlap strips for a more rustic look. This can be done by running your fingers along the edges or using scissors to gently pull at the threads.

Choosing the Right Burlap

Not all burlap is created equal. Some are thicker and more textured, while others are thinner and smoother. The type you choose depends on the look you're going for. Thicker burlap will give your wreath a more rustic, country feel, while thinner burlap might be better if you want a more refined, farmhouse look.

Also, consider the color. Natural burlap has a warm, earthy tone, but you can also find it in various shades of brown, beige, or even dyed in other colors. Choose a color that complements your home's decor or the season you're decorating for.

How Much Burlap Do You Need?

The amount of burlap you'll need depends on the size of your wreath and how densely you want to cover it. A good rule of thumb is to buy about twice the length of your wreath in burlap. This should give you enough to cover the wreath and have some left over for embellishments.

Remember, you can always trim excess burlap, but you can't add more if you run out, so it's better to have a little extra. Plus, you can always use leftover burlap for other crafts or to wrap gifts!

Attaching the Burlap to the Wire Wreath

Now that your burlap is prepared, it's time to attach it to the wire wreath. There are several ways to do this, depending on the look you want and the tools you have on hand.

For a simple, no-fuss method, you can use a hot glue gun. Just apply a line of hot glue to the wire wreath, press the end of your burlap strip onto it, hold for a few seconds, then wrap the burlap around the wreath. Continue this process, overlapping the burlap as you go, until the entire wreath is covered.

Wrapping the Burlap

If you prefer not to use hot glue, you can simply wrap the burlap around the wreath, tucking the end under itself to secure it. This method gives a more casual, rustic look and is great if you want to be able to remove the burlap later.

To start, cut a length of burlap about twice the circumference of your wreath. Fold it in half lengthwise, then place it on the wreath, with the raw edges facing out. Bring the two ends of the burlap together, tucking one end under the other to secure it. Then, start wrapping the burlap around the wreath, pulling it taut as you go. Once you've covered the entire wreath, tuck the end of the burlap under itself to secure it.

Embellishing Your Burlap Wreath

Once your wreath is covered in burlap, it's time to add some embellishments. This could be as simple as tying a bow with some twine or as elaborate as adding flowers, pine cones, and other natural elements.

To attach embellishments, you can use hot glue, floral wire, or even just tuck them into the burlap. If you're using a hot glue gun, apply a line of glue to the back of the embellishment, press it onto the wreath, and hold for a few seconds. If you're using floral wire, wrap it around the embellishment and the wreath, twisting the ends to secure it.

Hanging Your Burlap Wreath

With your wreath complete, it's time to hang it up. If your wreath doesn't have a hanging loop, you can easily add one. Just tie a piece of twine or ribbon into a loop and hot glue it to the back of the wreath.

Then, simply hang your wreath on a nail, hook, or wreath hanger. Step back and admire your handiwork. Your home is now welcoming and stylish, thanks to your beautiful burlap wreath.

Don't be afraid to get creative with your burlap wreath. This natural, versatile material lends itself to endless possibilities. Whether you're decorating for a holiday, a season, or just for the joy of it, a burlap wreath is a charming addition to any home. Happy crafting!