How to Make a Bakki Shower Filter

Transform your shower into a rejuvenating oasis with a homemade Bakki shower filter. Not only does it enhance your bathing experience, but it also offers numerous health benefits. By removing chlorine, heavy metals, and other impurities, a Bakki shower filter ensures that you're not inhaling or absorbing these harmful substances through your skin. Let's dive into the process of creating your own Bakki shower filter.

Before we begin, it's crucial to understand that a Bakki shower filter is essentially a vitamin C filter. It uses ascorbic acid to neutralize chlorine and other contaminants. Here's what you'll need to create your filter:

Materials Required

The primary component of your Bakki shower filter is vitamin C (ascorbic acid). You'll also need a shower filter housing, a shower filter media (like KDF-55 or ceramic balls), and some basic tools.

Here's a list of materials you'll need:

• Vitamin C (ascorbic acid) - 1000mg tablets
• Shower filter housing
• Shower filter media (KDF-55 or ceramic balls)
• Plumber's tape
• Adjustable wrench
• Screwdriver (if your filter housing has screws)

Preparation of Vitamin C Filter Media

Crushing vitamin C tablets might seem counterintuitive, but it's a vital step in creating your filter. The ascorbic acid in the tablets will react with the chlorine in your water, neutralizing it.

Here's how to prepare your vitamin C filter media:

1. Crush 10-15 vitamin C tablets into a fine powder. You can use a mortar and pestle or a pill crusher for this.
2. Mix the crushed tablets with your shower filter media (KDF-55 or ceramic balls) in a 1:1 ratio. This will ensure that the vitamin C is evenly distributed throughout the filter.

Assembly of the Shower Filter

Now that you've prepared your filter media, it's time to assemble your shower filter. The process is straightforward and should take only a few minutes.

Here are the steps to assemble your filter:

1. Wrap the threads of the filter housing with plumber's tape. This will ensure a tight seal and prevent leaks.
2. Screw the filter housing onto the shower arm. If your housing has screws, use a screwdriver to secure it in place.
3. Fill the filter housing with your vitamin C filter media. Make sure to leave some space at the top for water to flow through.
4. Secure the top of the filter housing. Ensure it's tight to prevent any leaks.

Maintenance of the Bakki Shower Filter

Regular maintenance is crucial to keep your Bakki shower filter working effectively. Here's what you need to do:

Replacing the Filter Media

The vitamin C in your filter media will eventually deplete, and you'll need to replace it. The frequency of replacement depends on your water usage and chlorine levels. On average, you should replace the media every 3-6 months.

Here's how to replace the filter media:

1. Turn off your shower and unscrew the filter housing from the shower arm.
2. Empty the old filter media into a container for disposal.
3. Prepare your new filter media using the same method described earlier.
4. Fill the filter housing with the new media and secure it back onto the shower arm.

Cleaning the Filter Housing

Over time, mineral deposits can build up inside the filter housing. It's essential to clean the housing to maintain its effectiveness.

Here's how to clean the filter housing:

1. Soak the filter housing in a solution of white vinegar and water (1:1 ratio) for about 30 minutes. This will help dissolve any mineral deposits.
2. Scrub the housing gently with a soft brush to remove any remaining deposits.
3. Rinse the housing thoroughly with clean water and allow it to dry before reassembling your filter.

Enjoy your rejuvenating showers with your homemade Bakki shower filter! Remember, the key to a long-lasting filter is regular maintenance. So, make sure to replace your filter media and clean your housing as needed. Happy filtering!